Halloween party ideas 2015
Tampilkan postingan dengan label EIA. Tampilkan semua postingan

Land demand for solar power

Solar energy for Germany, Europe and the world

There is a picture in the solar scene (picture 1) that probably almost everyone knows, it shows how large the surface area is when the world is switched to solar energy. It was, as far as I know, published by Mrs. Nadine May for the first time in her diploma thesis at DLR [1]:

Figure 1: Space requirements for solar power plants, according to Nadine May [1]
This image is widely used and should be checked for correctness. First of all, Algeria is the country that contains the squares for the world and Europe, and Libya, the country which possibly receives the German solar power plants, are no more colonies.

The squares have an edge length of: world 254 km, Europe 110 km and Germany only 45 km.

How big is the energy consumption in the world?

The energy consumption of the world is constantly growing (see figure 2), so it is difficult to specify the energy requirement without a reference year. Currently the demand is over 30,000 TWh (30,000,000,000,000,000 kWh) using the further processed data from the International Energy Agency (IEA). I have considered transforming factors for certain energy forms (transportation, heating) into electricity.

Figure 2: Global energy demand for electricity, transport and all other forms of demand

This energy should be converted with solar cells (PV) into electricity. There are several factors to consider, the efficiency, the irradiation in the course of a year and the necessary storage of the energy for the night.

Solar cells made of silicon achieve an efficiency of around 20% and are currently the most economical method to generate large amounts of solar energy.

The irradiation is very different in different regions of the earth, in particular one must always distinguish between direct and global irradiation. For photovoltaics (PV) only the global irradiation plays a role. Therefore, only these radiation is considered.

Figure 3: Global radiation perpendicular to the ground (source: WEC [2])
The map shows that many areas have an annual irradiation capacity of 2000 kWh per year, in particular the Sahara, but also on other continents good locations can be found; only exception is Europe.

Necessary Land Area

The necessary areas of the solar cells can now be easily calculated. For the world, we need 30,000,000,000,000,000 kWh per year, since one square meter has an incidence of 2000 kWh which would theoretically be 15,000,000,000 m� or 15,000 km�.
Now the efficiency comes into play, since only 20% is converted into electricity, we need the fivefold area, that is 75,000 km�. However, one has to be able to build the cells and needs paths and additional areas for inverters and storage, which should double the space requirement. This is 150,000 km�.
The transport and storage of energy, which is absolutely necessary, since at night the sun doesn't shine, will consume another 25% of the energy, so we are at 200,000 km�.

This corresponds to a square of 448 km of edge length, roughly twice as large as in the drawing.

Fair World

Currently, only a few people consume a lot of energy and lots of people have little energy. I am convinced that in the long term all people want at least to reach the standard of living as in Germany. For this, an energy quantity of 15,000 kWh per year and per person would be necessary. There are some countries that already have a much higher energy requirement, but we hope that energy efficiency will also save some energy.

With a world population of 8 billion people, this will yield an annual energy demand of 120,000 TWh or 120,000,000,000,000,000 kWh, or four times the current demand. This would increase the area with solar cells to a square with an edge length of 1000 km (Fig. 4).

Figure 4: Supply the world completely with solar energy in the future
Furthermore, the area of ??one million square kilometers is still small compared to the Sahara, but a serious part of the solid surface of the earth. The world has about 15 million square kilometers of sunny deserts, which means about 1/15 of this area must be used in the future for solar cells to deliver enough energy.

Storage requirements

If it is assumed that the energy must be stored for at least one day, this requires a storage capacity of 330 TWh (330,000 GWh)
Compared: Germany has pumped storage with a capacity of 0.04 TWh.
If large Gravity Storage systems with 80 GWh capacity (500 m diameter) solves the problem, a considerable number of 4000 pieces would have to be built.

Using batteries from Elon Musks Gigafactory, the gigafactory produces at a planned capacity 50 GWh per year; over 6000 years of production or 400 Gigafactories for 15 years are required. This is to provide the capacity for the first time and we have to continue production because batteries must be replaced after 15 years.

Gigantic conversion

If the global conversion to solar energy succeeds, huge buildings in the form of gigantic solar fields will be necessary. Surely the roof surfaces are never enough. Furthermore, investments are in the order of magnitude of the global gross social product of one year ($ 80,000 billion). This sounds a lot, but it will help mankind to be sustainable. Especially when one considers that afterwards energy is produced clean, without CO2 and at a low cost.

I think: we can do it!


Sources:

[1] Eco-balance of a Solar ElectricityTransmission from North Africa to Europe, Diploma Thesis of Nadine May, Braunschweig, May 2005

[2] World Energy Resources Solar 2016, World Energy Council 2017

A 186 page paper going into details is from Jakobson et.al., 100% Clean and Renewable Wind, Water, and Sunlight (WWS) AllSector Energy Roadmaps for 139 Countries of the World

The World powered by the Sun

Today, photovoltaic electricity is only a small fraction of the global electricity production. The volume seems to be one percent in the year 2015. If we do a very simple extrapolation and imagine, that all these PV modules were installed in 2014 and we continue this installation speed, than we need another 99 years, to have a 100% emission free PV world. But this is simply not the way the world goes round.
I will try to extrapolate the situation, based on data from the MIT report "The Future of Solar Energy" [1]

Analyse the past of Photovoltaic

If we wont to understand the future, it is very useful, to look into the past, not only to understand the development, but also to understand the error which occurred by predicting the future. 
The Energy Information Administration (EIA) and the International Energy Agency (IEA) predict since 10 years the global PV installations in a published outlook. The first outlook from 2006 predicted for the year 2030 a global installation of 100 GW. This volume was already matched in the year 2011, only five years after the report was published! Ok, one wrong shot can be excused.
In the year 2011, the EIA predicted 150 GW until 2020. Again a failure, already in 2014 we have reached 180 GW of solar. 
The MIT analysed all predictions and compiled them to a very nice picture:
Figure 1: Different predictions and the reality, source MIT [1] page 137
In the early time, the predictions of the IEA had an exponential growth, that is a good guess, because most of the time, new products grow in that type. The only problem was at that time, the growth factor was to small, for example see IEA 2008 prediction in figure 1. Today things have gone worse with the prediction from the IEA. Not only is the factor to small, the prediction includes a reduction of the production of PV itself. This seems hard to understand.(An in depth analysis was done by Christian Breyer, paper PDF)
Things go even more strange, when we look at the price predictions of PV. The EIA predicted the development of the PV price till the year 2030. It should be mentioned, that it is a very difficult task to predict a price of any product for more than 20 years. But this failure is very illuminating.
Figure 2: Price prediction by EIA IEO 2009 of PV and observed results. [1] page 137
The EIA IEO 2009 outlook predicted, that the capital cost of PV in the year 2030 will drop to 4$/W.
Actually, the price even for residential systems dropped to this value already in the year 2014. It should be noted, that the price for residential PV systems in Germany was at the same time at 2$/W.
The price for utility PV systems reached only two years after the report was published the predicted value for 2030, 4$/W. 
All this information should be available to the EIA today. It irritates me, why the EIA does not change the prediction about the deployment of PV although they can observe the rapid price drop obviously. (I am thankful for any helpful hint)

Is there enough material for a large roll out of PV 

One possible reason, to be pessimistic about the global roll out of PV might be the scare elements used in PV systems. Today almost all PV systems use Silicon to convert sunlight into electricity. The MIT analysed the production of different raw materials, essential for the production of SI-PV-modules. 
To set up a PV system we need concrete and steel to mount the panel in the direction of the sun. Glass, aluminium and plastic are necessary to protect the silicon cell, cooper and more plastic is necessary to transport the power away.
Figure 3: Commodity materials required for PV. [1] page 131
Today, all these commodity are produced in a volume, that no real bottle neck will occur. In figure 3, we can see, that the steel production of 9 days is sufficient, to mount all PV panels for 5% of the global electricity production, within half a year, the steel production is sufficient for a 100% conversion to PV.
The least available material in this consideration is glass. For a 100% PV world, we need the glass production of 20 years. But glass production is in no way a limiting factor. The necessary raw material is sand, an endless resource.
The solar cell itself consists of a silicon waver and some silver, are they rare?
Figure 4: The annual production and requirement for a solar future. [1] page 135
In figure 4 we see, that silver might get a little problem, because we need an amount of silver that is produced within 30 years. It should be mentioned that new technologies of production can reduce the necessary mass of silver very strong. Other elements, like Ga are only necessary if we would use GsAs cells in our PV systems what is not widely the case. 
We conclude, the raw material is no show stopper for a PV future.

My prediction of PV growth

Compiling all this information, I come to a quite different prediction than the IEA. My simple, but till today best guess is, that the exponential growth will continue, but at a lower rate. 
Figure 5: Long term trend of PV installation.
In figure 5 we see the global installation of PV shown as a black curve in this logarithmic plot. In the year 1992, we had only 100 MW of PV installed, ten years later, 2002 it was 1000 MW, Today it is about 200 000 MW!
Update to Figure 5 including the growing power demand, wind and the latest figures available 2016.
If the growth rate continues at 25%, as seen within the last three years, we will reach 100% PV not long after the year 2030. Remember, today we have a global power plant pool of 5300 000 MW, sufficient to power half the world. Even if we expect, that the future is fair to all people, we need "only" 10 000 000 MW to bring electricity in every home on this planet, long before 2050.  

One problem remains: Storage

Without an affordable storage system, PV can only bring electricity during sunny daytime. For a complete conversion, we need about 90 000 GWh of storage [2].
One solution for residential systems may be the power wall from Tesla, but I am not convinced, that this makes sense on a large scale. For large scale, I recommend the Gravity Storage!

References:

[1] The Future of Solar Energy, 2015 Massachusetts Institute of Technology, ISBN (978-0-928008-9-8)
[2] Elon Musk predicts (minute 18) during the presentation of the power wall 90 000 GWh of required storage. https://youtu.be/yKORsrlN-2k
Diberdayakan oleh Blogger.